DH5000 Series / Grade 2 / (SVR) surface vertical rod exit device

DH5630S Panic-Rated SVR | Wide Stile Design Exit Device

  • UL listed Panic Hardware or Fire Exit Hardware
  • Narrow Stile Design & Flush Doors Use

Suited For:

  • Any pairs of emergency exit doors
  • Pairs of doors in cross-corridors
  • Double egress applications
  • Passage doors in hospitals, factories or any public buildings


  • For use on all single or double doors where twopoint latch is desirable (inactive leaf of double door in specialty). Fire rated device must be use on
    4 ‘x 8″ single or 8’ x 8″ double fire labeled doors
    (max. size).
  • Fits for 1 3/4″ (44mm) thick standard RHR or LHR hollow metal door and wood doors, other than standard 1 3/4″ is available but specify door
    thickness when ordering.
  • Minimum Door Stile width: 2 1/2″ (63mm).
DH534 Top Strike
Applied to surface of stop.
Hardened steel and plated.
DH537 Bottom Strike
Applied to surface of floor.
Nonferrous alloy and plated.


Device Head Cover Stainless Steel, nonferrous alloy
Chassis Steel, stainless
Mechanism Housing Steel or Stainless Steel
Push Bar Steel or Stainless Steel
End Cap Steel or Stainless Steel
Latch Bolt 100% Stainless Steel, 1/2″ (13mm) throw
Latch Case Covers Steel, stainless steel
Vertical Rods Tubular aluminum with rod guides
Strikes Top DH534, Bottom DH537
Handing Non-handed
Mounting Fasteners Machine screws furnished standard, Sex Nut & Bolt (SNB) are required for wood doors. Order SNB separately.
Dogging* Hex key dogging standard (Allen-type key furnished)
Dogging Options Cylinder dogging or less dogging
Finish 605, 630, 689, 690, four finishes
Dimension See Spec. Sheet
Device Length See Spec. Sheet
UL Listed For Panic Hardware

Index   |   < Previous   |   Page 50   |   Next >